By Aaron Peter, RHA Head of Technical, Engineering and Policy
For UK transport operators, defect reporting isn’t just good practice, it’s a core legal duty under the DVSA Guide to Maintaining Roadworthiness (GTMR) and a key pillar of operator licence compliance.
Why defect reporting matters
DVSA expects operators to run a maintenance system that keeps vehicles roadworthy at all times. A critical part of that system is ensuring drivers promptly report any defects that could affect safe operation, and that the operator records, assesses, and rectifies those defects before the vehicle is used again.
At an operator compliance audit or maintenance investigation, DVSA inspectors and compliance auditors will look for:
Evidence of an effective driver defect reporting process (including nil returns where practicable)
Records showing reported defects were assessed and rectified by competent personnel
A complete audit trail from identification through to repair and re-check
Failure to demonstrate this “cradle to grave” trail is a common route to adverse findings, OCRS impact, and in serious cases, regulatory action against the licence.
The cradle to grave system
Think of defect management as three linked stages that must all be evidenced on the vehicle’s maintenance file:
1. Recorded – the defect is captured in writing
DVSA requires that any defect found during the daily walkaround check, while the vehicle is in use, or on return to base must be the subject of a written report by the driver or a responsible person.
Electronic systems are fully acceptable, provided they capture the same level of detail and can be produced on request.
Nil‑defect reporting (recording “no defects” on days when the walkaround check is clear) is not strictly mandatory but is strongly recommended as good practice. It helps prove checks are actually being done and supports your defence if a defect later arises. Actioned defect reports must be kept for 15 months.
2. Reported – the defect reaches someone with authority to act
All drivers’ defect reports must be given to a responsible person with sufficient authority to ensure appropriate action is taken. In practice, this is often the transport manager, workshop controller, or nominated maintenance lead.
DVSA explicitly expects operators to prevent vehicles with safety‑critical defects from being used and to maintain a clear audit trail from identification through to repair.
3. Repaired – rectification is completed, signed off, and filed
Once a defect is reported, the operator must ensure it is rectified by competent personnel before the vehicle is used (unless the defect has been assessed as not affecting roadworthiness and a clear rationale is recorded).
This repair record becomes part of the vehicle’s maintenance history and, like the original defect report, must be retained for at least 15 months. Electronic records are acceptable if they remain accessible for that period.
How this links to your operator licence obligations
Your operator licence requires you to maintain vehicles in a fit and roadworthy condition. DVSA’s audit standards explicitly look for:
A robust and effective defect reporting process
Evidence of effective rectification work from reported defects
Training or other methods to ensure drivers report defects early and accurately
During an operator compliance audit, auditors will sample defect reports over a period and expect to see:
The original defect entry
Evidence of assessment and decision on use
The repair record and sign‑off
Consistency with safety inspection records and any recurring defect patterns
If defect reports are missing, incomplete, or not reconciled with repair records, DVSA may infer weaknesses in your maintenance system, even if no accident has occurred.
Practical tips to strengthen your system
Use a standardised defect form (paper or digital) that ensures completion of all key fields: vehicle, date, defect details, reporter, assessment, repair, sign‑off.
Train drivers not only to spot defects, but to understand what must be reported, how to describe symptoms clearly, and why timely reporting matters for compliance and safety.
Periodically reconcile defect logs with safety inspection records and maintenance invoices to ensure nothing has slipped through.
Bottom line
“Recorded, Reported and Repaired” is the backbone of a compliant defect management system. If every defect can be traced from the driver’s initial note through to a signed repair and filing in the vehicle’s maintenance history, you’re not only meeting DVSA GTMR expectations, you’re also protecting your operator licence and, most importantly, keeping your vehicles and drivers safe on the road.